Leave Your Message

825x0.05mm Gr1, 1x Polyimide (Overlap 66%, With Adhesive), OD Around2.29mm, BDV 6kV

Single wire diameter: 0.05mm,   Number of strands:825

Thermal rating: class 155,   width/thickness: 2.29mm

MOQ:100KG, 1KG=58M

    Introduction

    The 825x0.05mm Polyimide Taped Litz Wire is a high-performance conductor engineered for high-frequency applications requiring superior dielectric strength in a compact form factor. This construction consists of 825 individual strands of Ø 0.05mm Grade 1 enameled copper, precisely bundled to minimize AC power losses. The core is protected by a single layer of Polyimide (PI) film, applied with a 66% overlap and an integrated adhesive coating. This design achieves a stable outer diameter (OD) of approximately 2.29mm, providing a robust solution for Class F (155°C) thermal environments where space-saving and high-voltage isolation are critical.
    Standard: 
    · IEC 60317-23
    · NEMA MW 77-C
    · Customized according to customer requirements.

    Advantages

    Integrating our 825-strand Polyimide-wrapped Litz wire provides significant improvements in energy efficiency and safety margins for advanced magnetic designs. The combination of high-purity copper and a precision-wrapped PI jacket results in a high Q-factor and reduced heat generation, essential for high-frequency transformers and resonant converters. The Polyimide film offers exceptional mechanical toughness and chemical resistance, protecting the delicate 0.05mm strands against abrasion and dielectric failure. This high-reliability component is specifically designed for demanding applications such as medical power supplies, EV charging modules, and aerospace electronics where consistent performance under 6kV stress is required.

    Features

    The primary technical advantage of this Litz wire is its multi-layer insulation system, which delivers a certified breakdown voltage (BDV) of 6.0kV. The use of 0.05mm ultra-fine strands effectively mitigates skin and proximity effects at high frequencies, while the Grade 1 solderable enamel allows for efficient termination. The secondary insulation—a high-performance Polyimide tape with a 66% overlap—ensures a continuous, high-integrity dielectric barrier. The addition of a specialized adhesive layer during the wrapping process guarantees that the tape remains securely bonded, preventing slippage and maintaining a consistent round profile during high-tension winding.

    Specification

    Description Conductor diameter*Strand number 0.05*825
    Single wire Conductor diameter(mm) 0.05
    Conductor diameter tolerance (mm) ±0.001
    Minimal insulation thickness(mm) 0.005
    Maximal overall diameter (mm) 0.06
    Thermal Class 155
    Strand Composition Strand number 825
    Pitch(mm) 30
    Stranding direction S
    Insulation layer /Category PI
    UL /
    Material specs(mm*mm or D) 12
    Times of Wrapping 1
    Overlap(%) or thickness(mm),mini 66
    Wrapping direction Z
    Characteristics Thickness* width /(mm) 2.2
    Max pin holes /6m 50
    Max resistance (Ω/Km at20℃) 0.011
    Min breakdown voltage (V ) 6000
    ..package / spool PT-10
    / Weight per spool (KG) 7

    Leave Your Message