Engineered for high-frequency performance and optimized thermal dissipation in micro special and coreless motor coils.
In the rapidly evolving landscape of miniature motion control, the demand for high-efficiency, high-density electromotive devices has driven a paradigm shift in winding technologies. Micro special motors and coreless (slotless) DC motors represent the pinnacle of this engineering revolution. These advanced motors eliminate the traditional slotted iron core, replacing it with a self-supporting, high-density copper winding. However, operating these motors at the high frequencies required for micro-scale precision introduces severe electromagnetic challenges, namely the skin effect and proximity effect.
Micro Litz Led (Low Energy-loss Design) wire configurations emerge as the definitive material solution to these challenges. By utilizing bundles of individually insulated ultra-fine magnet wires twisted in a mathematically optimized pattern, Micro Litz configurations ensure that each strand occupies both the interior and exterior of the conductor bundle at equal intervals. This design minimizes high-frequency AC resistance, reduces eddy current losses, and prevents thermal runaway. As a result, manufacturers of coreless motors can achieve unprecedented power density, thermal stability, and operational longevity in footprints measuring only a few millimeters in diameter.
In traditional motor design, solid copper wire is sufficient because operating frequencies are relatively low. However, in micro special motors operating at frequencies reaching tens or hundreds of kilohertz (kHz), the current density tends to migrate to the outer boundary of the conductor (the skin effect). Furthermore, the magnetic fields generated by adjacent windings distort the current distribution across the conductor profile (the proximity effect). This results in localized heat spots, increased resistance, and a dramatic drop in overall motor efficiency.
By integrating ultra-fine wire drawing capabilities down to 10 microns (0.01mm) with sophisticated film tape insulation like Polyimide (Kapton), Micro Litz configurations distribute high-frequency current uniformly. This enables coreless motors to run cooler, deliver higher continuous torque, and operate with maximum battery efficiency in portable or autonomous applications.
The commercial and industrial footprint of micro special and coreless motors winding with high-performance Micro Litz wire spans several high-tech domains. The unique thermal and mechanical profiles of these wires unlock capabilities that were previously restricted by space and weight constraints.
In minimally invasive surgery, robotic arms and handheld surgical drills require motors that deliver high torque without generating heat that could damage human tissue. Coreless motors wound with Kapton-taped Micro Litz wire (featuring 66% overlap and breakdown voltages up to 4kV) provide the necessary electrical isolation and thermal safety. The low-loss characteristics ensure that these devices remain cool to the touch even during prolonged surgical procedures, maintaining sterile integrity and patient safety.
Weight and efficiency are the primary design metrics in aerospace and drone technologies. Micro special motors wound with ultra-lightweight Litz wire allow micro-UAVs to achieve longer flight times by maximizing battery conservation. Furthermore, the high-vibration environment of aerospace applications demands insulation that can withstand mechanical rubbing; the polyimide adhesive film wrap provides unmatched mechanical durability and chemical resistance.
Modern semiconductor assembly requires sub-micron positioning accuracy at high speeds. Slotted motors suffer from cogging torque, which causes microscopic vibrations. Coreless motors solve this with a smooth, cogging-free rotation. By utilizing precision-profiled Litz wires (such as 2000 x 0.05mm rectangular profiles), manufacturers can pack more copper into the slotless stator gap, increasing motor constant ($K_m$) and acceleration rates.
From VR haptic feedback actuators to micro cooling pumps in high-performance computing laptops, space is at an absolute premium. The ability to route and wind flexible, ultra-fine Litz wire around complex geometries allows consumer hardware designers to push the boundaries of device miniaturization without compromising on reliability.
A Leading Force in Fine and Ultra-Fine Enameled Wire Manufacturing
Zhuhai Transmo Technology Co., Ltd is a professional enameled wire manufacturer for fine and ultra fine enameled wire, rectangular wire as well as Litz wire. The finest wire diameter reach 10 micron. TRANSMO have been a leading supplier for self-bonding wire and High Tension Wire. All the wire can be produced according to industry standards such as IEC 60317, NEMA MW1000, JIS C3202 or to customer specific requirements.
TRANSMO’s wires is widely used in consumer electronics, telecommunication, automotive, new energy, IT industry and medical equipment.
With more than 15 years' experience in manufacturing enameled wire, TRANSMO people adopt advanced drawing machines and enameling machines, precise processing technology, and seriously quality control to produce wire with reliable and consistent quality. From incoming material, semi product, final product and delivery, the whole process is well recorded and monitored, the advanced code management allow our products with unique code and production is traceable.










TRANSMO supplied wires worldwide for 780 customers in more than 20 countries. We are experienced in international trade, we know how to understand the need and concern of customer, how to deliver goods to customer in any place in time.





Our commitment to rigorous quality control processes is validated by international standards and industry certifications.






The manufacturing landscape for micro special motors is shifting toward ultra-precision automation. As assembly tolerances shrink to the single-digit micron range, the materials used must exhibit absolute consistency. In coreless motors, where the coil itself forms the structural body of the rotor or stator, mechanical rigidity and dimensional accuracy are critical.
This is where profiled and taped Litz wire structures offer major advantages. Profiled rectangular Litz wires (like the 2000 X 0.05mm Class F profiled configuration) allow for a higher slot fill factor compared to round wires. A higher fill factor means more copper can be packed into the same air gap, increasing the magnetic flux density and output torque of the motor without enlarging its physical footprint.
Furthermore, the application of high-performance adhesives on polyimide tapes (overlap 66%) ensures that when the coil is wound and heat-cured, the individual strands bond together into a rigid, self-supporting structure. This eliminates the need for heavy plastic bobbins or metal supports, which is the core principle of high-efficiency coreless motor design.
• High Breakdown Voltage (BDV): With insulation values reaching 4kV and higher, these wires prevent electrical breakdown between adjacent turns in high-voltage micro-drives.
• Thermal Classification: Class F and Class H ratings ensure continuous operation at temperatures up to 155°C and 180°C, respectively, protecting the motor against transient thermal overloads.
• Mechanical Robustness: The 66% overlap tape application provides a continuous, double-layered barrier against abrasion during high-speed automated winding processes.
Select from our standard configurations or request custom strand counts and insulation profiles tailored to your motor requirements.