Leave Your Message
Next-Gen Electromagnetic Technology

Milan Atlas Copper Winding Wire For High-Frequency Transformers & Wireless Charging Coils

Engineered with micro-scale precision, extreme thermal endurance, and tailored self-bonding polymers to mitigate skin effect and proximity loss across high-frequency power electronics.

Industrial Horizon

The Evolution of High-Frequency Winding Technology

Navigating wide-bandgap (GaN/SiC) semiconductors, resonant topologies, and the urgent demand for sub-millimeter coil compactness.

The modern power electronics landscape is undergoing a monumental transition driven by the widespread commercialization of Wide-Bandgap (WBG) semiconductors, particularly Gallium Nitride (GaN) and Silicon Carbide (SiC) switches. As switching frequencies surge from traditional hundreds of kilohertz into the megahertz (MHz) spectrum, the fundamental limitations of standard magnet wires emerge as primary thermal and efficiency bottlenecks. Under these extreme conditions, Milan Atlas Copper Winding Wire is specifically engineered to mitigate high-frequency eddy-current losses, specifically the compound challenges of skin effect and proximity effect.
⚡

Mitigating HF Losses

At operational frequencies surpassing 100 kHz, current densities concentrate on the outermost skin of conductors. Milan Atlas Copper Winding Wire addresses this by optimizing copper purity (99.999% OFC) and tight geometric tolerance down to ultra-fine micro-diameters, preventing localized hotspot formation.

🔬

Advanced Bond Enamel Chemistry

Designed with customized polyurethane, polyesterimide, and polyamide-imide matrices, our self-bonding wires achieve structural integrity without external bobbins, allowing planar magnetic coils to increase effective copper fill factor up to 78%.

🛡

Superior Dielectric Breakdown

High dV/dt slew rates in fast-switching bridges impose acute dielectric stress on magnet wire turns. Our proprietary multi-layer enameling technology guarantees zero pinhole tolerances and unmatched partial discharge resistance.

Simultaneously, the explosive growth of the Electric Vehicle (EV) segment, localized Qi2 magnetic wireless charging ecosystems, and high-density industrial switch-mode power supplies (SMPS) has necessitated uncompromising dimensional accuracy. Designers are no longer satisfied with standard gauge tolerances. Transmo's ultra-precise drawing and enameling technology guarantees concentricity that prevents parasitic capacitance spikes, maintaining deterministic resonant tank performance in LLC converters and multi-coil inductive charging arrays.

Application Engineering

Mission-Critical Operating Scenarios

From micro-watt biomedical implants to multi-kilowatt dynamic vehicular inductive couplers.

Resonant Planar & Flyback Transformers

In high-density server power supplies (80 Plus Titanium standards) and telecommunication DC-DC bus converters, physical space is tightly constrained. Conventional winding architectures generate severe eddy field distortions that elevate copper temperature beyond safe operational envelopes. Milan Atlas ultra-fine enameled round wire and engineered stranded configurations overcome these barriers.

By implementing customized polyurethane Class 155 to Class 180 enamels, transformer developers can wind tightly compacted interleave matrices with high thermal conductance, minimizing core leakage inductance and achieving system efficiencies north of 97.5%.

High-Q Wireless Power Transfer (WPT)

Wireless charging efficiency is determined directly by the coil quality factor (Q-factor) and coupling coefficient (k). Milan Atlas copper winding wire features optimized dielectric layers with minimized dissipation factors (tan δ), reducing parasitic intra-winding capacitance.

Whether in consumer electronics compliant with WPC Qi and Qi2 magnetic alignment or automotive high-power wireless charging coils delivering 11kW to 22kW across air gaps, the wire provides superior high-frequency mechanical stability and resistance to thermal-shock degradation.

Parameter Industrial Standard Spec Milan Atlas Copper Winding Wire Capability
Conductor Dimension Range 0.05 mm – 1.20 mm Ultra-fine 0.010 mm (10 micron) to custom heavy builds
Thermal Endurance Class Class 130 – Class 155 Class 155, Class 180, Class 200, Class 220 options
Bonding Mechanisms External varnishing / Hot-air Self-bonding via Heat-air blast, Resistance heating, or Solvent activation
Dielectric Pinhole Rate Standard IEC tolerances Zero-pinhole high-continuity guarantee (100% inline monitored)
Solderability Performance Stripping often required Directly solderable at 360°C – 390°C without mechanical stripping
Manufacturing Excellence

About Zhuhai Transmo Technology Co., Ltd.

A legacy of 15+ years delivering extreme-gauge magnet wires and certified self-bonding winding solutions globally.

Zhuhai Transmo Technology Co., Ltd. is an industry-leading enameled wire manufacturer specializing in fine, ultra-fine enameled wire, rectangular magnet wire, and precision multi-conductor Litz configurations. Reaching an ultra-fine conductor limit of merely 10 microns, TRANSMO stands at the technological forefront of self-bonding wire and High Tension Wire production.

Every spool of wire conforms meticulously to universally recognized international testing criteria, including IEC 60317, NEMA MW1000, and JIS C3202, alongside strictly tailored proprietary customer requirements. Serving mission-critical industries, TRANSMO wire forms the electromagnetic core of cutting-edge consumer smart devices, 5G telecommunication infrastructure, automotive power modules, renewable new energy arrays, IT server gear, and ultra-sensitive medical electronics.

With over 15 years of technical expertise, our engineers deploy computer-controlled drawing machines and enclosed high-speed horizontal and vertical enameling lines. Our process ensures uniform coat build, optimal elasticity, flawless cut-through resistance, and uncompromising electrical isolation.

From raw oxygen-free electrolytic rod procurement, multi-stage diamond die drawing, automated polymer lacquering, to online laser dimension verification, every single bobbin receives a unique traceability code management footprint, granting clients absolute visibility into raw material lots and thermal cure records.

2015
Established In
20+
Export Destinations
780+
Serving Customers
10μm
Finest Wire Capability

State-of-the-Art Production & Quality Control Equipment

TRANSMO Drawing Equipment
TRANSMO Continuous Enameling Line
TRANSMO Precise Spooling Machinery
TRANSMO Automated Tension Controls
TRANSMO Testing Equipment
TRANSMO Precision Die Workshop
TRANSMO High-Speed Winding Inspection
TRANSMO Thermal Annealing Facility
TRANSMO Dielectric Strength Tester
TRANSMO Clean Packaging Cleanroom
Global Presence

International Trade & Global Partner Ecosystem

TRANSMO delivers electromagnetic solutions to over 780 tier-one customers in more than 20 countries worldwide.

We are profoundly experienced in international logistics, multi-jurisdiction compliance, and agile technical field support. We understand the stringent concerns of magnetics designers regarding consignment protection, spool run-out tolerances, packaging humidity controls, and guaranteed on-time delivery across North America, Europe, and the Asia-Pacific region.

TRANSMO International Magnetics Exhibition Stand
TRANSMO Engineering Team Discussing Wire Tech
TRANSMO Technical Consultation With Global Buyers
TRANSMO Global Trade Booth Display
TRANSMO Precision Coil Technology Presentation
TRANSMO Transformer Wire Solutions Showcase
Uncompromising Quality

International Compliance & Quality Accreditations

Audited and verified in accordance with worldwide safety, environmental, and thermal electrical isolation standards.