Leave Your Message

Transmo 0.08mm 40AWG Enameled Copper Wire for RFID Inlay

This 0.08mm 2UEW/155 Enameled Copper Wire is a high-precision, solderable conductor designed for RFID antennas, smart card modules, and micro-inductors where secondary bonding or mechanical support is utilized. Composed of high-purity oxygen-free copper and a Grade 2 (2UEW) polyurethane insulation, it offers a Class F (155°C) thermal rating for consistent performance under standard lamination temperatures. The wire is engineered for high-speed automated winding, providing excellent dielectric integrity and direct solderability without the need for manual stripping, ensuring efficient and reliable terminations in high-volume production.

    Product Advantages

    The 0.08mm 2UEW enameled wire offers an optimal balance of electrical conductivity and manufacturing economy for standard RFID tag production. Its high-purity copper core ensures low DC resistance (DCR) and stable signal induction, while the Grade 2 (2UEW) polyurethane coating provides a robust insulation barrier that resists pinholes and mechanical abrasion during high-tension winding. Unlike self-bonding variants, this standard wire offers a slimmer outer diameter (OD), allowing for maximum turns and a higher fill factor in space-constrained card cavities. Furthermore, its exceptional solderability at temperatures between 380°C and 480°C enables rapid, reliable connection to chip modules, significantly reducing assembly cycle times and enhancing the overall cost-efficiency of mass-produced smart tags and sensors.
    Standard
    · IEC 60317-20
    · NEMA MW 79
    · Customized according to customer requirements.

    Specification

    Item Unit Technical Data
    Designation 2UEW/155 0.08
    Applicable standard IEC 60317
    Conductor diameter mm 0.08±0.001
    Material of base coat Polyurethane
    Min. thickness of base coat mm 0.007
    Overall Diameter mm 0.087-0.09
    Minimum breakdown voltage V 500
    Pin-hole Holes /5m ≤5
    Elongation minimum 17%
    DC Resistance Ω/m,20℃ 3.258-3.781
    Heat shock 175℃/1h
    Cut-through No failure shall occur within 2min at 200℃
    Solderability 395±5 ℃/2S
    Heat bonding temperature 120~140 ℃
    Spool size PT-1/HKV125
    Max Weight kg 1/2.5
    Storage condition Temperature: <60℃ Humidity: <90%
    Storage term 48 months

    Leave Your Message